Standard head support cushion for supine
positioning with centering disc.
WingSTEP Components
close
WingSTEP Components
Pillow A - Standard
ART.-NR.
P10107-240
Pillow Standard A
P10107-241
Pillow High B
P10107-202
Pillow Wedge C
P10107-218
Pillow Block H
Comfort Pillow
Comfort pillow for stable and slightly retroflected positioning of the head.
ART.-NR.
P10107-268
Pillow Tilt Wide G
Comfort Pillow
Pillow for stable positioning of the head. It is higher than the standard Pillow A and supports the head and neck area.
ART.-NR.
P10107-267
Pillow Wide A
ProSTEP Pillow Fix
Head support which either can be used alone or mounted on a tabletop using an indexing adapter.
ART.-NR.
P10107-232
ProSTEP Pillow Fix
ProSTEP Pillow Slide
Head support which either can be used alone or mounted on the tabletop using the indexing adapter. Due to the smaller baseplate it can
be moved in cranial/caudal direction.
ART.-NR.
P10107-233
ProSTEP Pillow Slide
WingSTEP MCT Wedge
10° wedge to raise WingSTEP, covered with artificial leather.
ART.-NR.
P10107-512
MCT Wedge 5°
P10107-440
MCT Wedge 10°
P10107-513
MCT Wedge 15°
WingSTEP MCT Wedge evo indexed
10° wedge to increase the height of the WingSTEP. Can be mounted on any indexed tabletop by use of Indexing bars.
ART.-NR.
P10107-478
MCT Wedge evo indexed
MCT Wedge Indexing Adapter
The MCT Wedge Indexing Adapter prevents slipping of the MCT Wedge 5 °, 10 ° and 15 ° during treatment and allows the use of MCT Wedge Indexing Bars.
ART.-NR.
P10107-474
MCT Wedge Indexing Adapter
P10107-475
MCT Wedge Indexing Bar Elekta
P10107-476
MCT Wedge Indexing for Varian
P10107-477
MCT Wedge Indexing for Siemens
Arm Support- Ball Joint
Flexible covered arm support – attached to a ball joint.
ART.-NR.
P10107-444
Arm Support Ball Joint – Small (2 pcs.)
Arm Support - Pin Joint
Flexible covered arm support – attached to a pin joint.
ART.-NR.
P10107-441
Arm Support Pin Joint – Small (2 pcs.)
Wrist Support – Ball Joint
Flexible covered wrist support – attached to a ball joint.
ART.-NR.
P10107-443
WS Wrist Support (2 pcs.)
PU Cover for Arm Supports
Washable, leakproof PU Covers.
ART.-NR.
P10107-242
PU Cover for Arm Support (2 pcs.)
P10107-243
PU Cover for Wrist Support (2 pcs.)
WingSTEP Arm Support Elevation Barrel
The WingSTEP Arm Support Elevation Barrel is used to increase the height of the arm shells on the WingSTEP system.
ART.-NR.
P10107-488
WingSTEP Arm Support Elevation Barrel
WingSTEP Elevation Block ABS
Elevation block with integrated indexing system to increase the height of the WingSTEP. Made of hard plastic.
ART.-NR.
P10107-452
WingSTEP Elevation Block ABS
WingSTEP Baseplate
WingSTEP Baseplate with 4 ball joints, without arm supports and pillows.
ART.-NR.
P10107-464
WingSTEP low - Baseplate with 4 ball joints
P10107-465
WingSTEP high - Baseplate with 4 ball joints
P10107-498
WingSTEP Carbon low - Baseplate with 4 ball joints
P10107-499
WingSTEP Carbon high - Baseplate with 4 ball joints
P10107-466
WingSTEP MR low - Baseplate with 4 ball joints
P10107-490
WingSTEP MR high - Baseplate with 4 ball joints
P10107-531
WingSTEP high for Varian Baseplate
P10107-532
WingSTEP low for Varian Baseplate
HeadSTEP upper plate for WingSTEP
The HeadSTEP upper plate for WingSTEP was designed for the routine immobilization of the head. It is an extension of the WingSTEP system.
ART.-NR.
P10107-467
HeadSTEP Upper Plate for WingSTEP
WingSTEP Pole Bar
The adjustable WingSTEP pole bar allows the patient to hold on during the examination at the head end.
ART.-NR.
P10107-487
WingSTEP Pole Bar
WingSTEP Pole Bridge Bar
The adjustable WingSTEP Pole Bridge Bar allows the patient to hold on to the head end during the treatment. Through 5 individually adjustable locks, it enables a constant, precisely reproducible position of the upper and lower arms and gives the patient a secure feeling.
ART.-NR.
P10107-522
WingSTEP Pole Bridge Bar
iCAST Chin Double
iCAST mask material for head immobilization. To be used with the HeadSTEP Upper Plate for WingSTEP.
ART.-NR.
P10107-334
iCAST Chin Double Micro 4mm
Wall Holder
Wall Holder to store the WingSTEP.
ART.-NR.
P10107-446
Wall holder
Systems
Systems